China Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler Manufacturer and Supplier

Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler

Product Detail

Product Tags

Feedback (2)

We have the most advanced production equipment, experienced and qualified engineers and workers, recognized quality control systems and a friendly professional sales team pre/after-sales support for Freezer Room, Transport Condensing Units, Walk In Freezer For Sale, We respect your enquiry and it truly is our honor to operate with each friend around the world.

Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler Detail:

Company Profile

2121

Product Description

DJ100 100㎡ cold storage evaporator

Ref.Capacity (kw)

18.5

Cooling Area (m²)

100

Qty

Diameter (mm)

Φ500

Air Volume (m3/h)

4×6000

Pressure (Pa)

167

Power (W)

4×550

Oil (kw)

Catchment Tray (kw)

2.2

Voltage (V)

220/380

Installation Size (mm)

3120*650*660

Installation size data

A(mm)

B(mm)

C(mm)

D(mm)

E(mm)

E1(mm)

E2(mm)

E3(mm)

F(mm)

Inlet tube (φmm)

Back trachea (φmm)

Drain pipe

3110

690

680

460

2830

700

Maintenance work

1. Leak detection of the evaporator is often carried out. Leakage is a common failure phenomenon of evaporators, and you should pay attention to frequent leak detection during use.

When the ammonia evaporator leaks, it has a pungent odor, and there is no frost at the leaking point. Phenolphthalein test paper can be used to check the leak, because ammonia is alkaline, it turns red when it meets phenolphthalein test paper.When you look at it, it is usually a leak point where there is no frost in the evaporator. You can also use soapy water to find the leak at the leak.

2. Check the frosting condition of the evaporator frequently. When the frost layer is too thick, it should be defrosted in time. When the frost is abnormal, it may be caused by blockage, and the cause should be found and eliminated in time.

3. When the evaporator is out of service for a long time, it is advisable to bump the refrigerant into the accumulator or condenser and keep the pressure of the evaporator at about 0.05MPa (gauge pressure). If it is the evaporator in the salt pool, it needs to be flushed with tap water. After flushing, fill the pool with tap water.

Product detail pictures:

Related Product Guide:

The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler , The product will supply to all over the world, such as: Philippines, Jamaica, Qatar, We are introduced as a one of the growing manufacture supplier and export of our products. We have a team of dedicated trained professional who take care the quality and timely supply. If you are looking for Good Quality at a good price and timely delivery. Do contact us.

Refrigeration Evaporator

Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!

By Gustave from Greenland - 2017.11.29 11:09

The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.

By Megan from Burundi - 2017.10.25 15:53

Write your message here and send it to us